HOW TO MAKE EHI CONFIGURATION
+3
jhonzlhiz0015
GreatJohn
Admin
7 posters
Page 1 of 1
HOW TO MAKE EHI CONFIGURATION
How to make Ehi Config
Terminology:
Ehi - is the abbreviation of Evozi Http Injector
UrlHost - is the Bug Host or what we call Proxy Server.
Remote Proxy - the gateway of payload that connects ProxyServer into Networks Ip
Ssh - is the abbreviation of Secure Shell that used to protect data transferring.
How to find a Proxy Server:
1.Open the Data or Wifi
2.Make sure you have no balance,promo or any vpn
3.Go to your Default Browser (built in)
4.Type your desired website (example: clubzed.ph)
5.If its successfully Open without any load or vpn then it is a Proxy Server.
How to find a Remote Proxy:
1.Access the internet and search for websites like gatherproxy.com
2.Find the lowest latency according to your desired country(example Singapore 128.199.01.01 Port:80)
3.If you have gather many Singapore Remote Proxy then we proceed to the next step.
How to make SSH account:
1.Access the internet and look for the websites like,
tcpvpn.com
bestvpnssh.com
mytunneling.com
skyssh.net
jetssh.com
2.Make and Register an account to your desired country (example: Singapore)
3.After successfully registered,Dont forget the following important information after you registered.
example i make a singapore account in tcpvpn,so it should go like this
(I will create on tcpvpn.com and I will choose a singapore and I will input a username of aldz and a password of 12345.
After you successfully created a Ssh account this might be like)
HOST:128.199.01.01
SSH PORT:22
USERNAME:tcpvpn.com-aldz
PASSWORD:12345
How to Generate Payload:
1.Open the Http Injector App.
2.Go to Payload Generator on left side.
3.Choose your desired setup.
For example I am using Globe,the I want normal connect,
The set up must go like this:
NORMAL
UrlHost:clubzed.ph
Connect, Normal Injection
X-Online-Host
Keep-Alive
then Generate.
The generated payload must appeared like this:
CONNECT [host_port] [protocol][crlf]Host: clubzed.ph[crlf]X-Online-Host: clubzed.ph[crlf]Connection: Keep-Alive[crlf][crlf]
After generated, input the Remote Proxy You gather ealier in gatherproxy.com with a corresponding Port.
Example:
128.199.01.01:80
Go to Ssh Settings in the left side and Fill up the following. Use the info of your ssh account you created earlier.
this is my example
SshHost: 128.199.01.01
SshPort: 22
Username: tcpvpn.com-aldz
Password:12345
After you set up all, Click start. Always check the log panel of the injector. This indicates whether your Payload is correct or Remote Proxy is not working. If always reconnecting,injecting try to find another remote proxy and test again until it succeded to released an Established Connection.
Payload Format
Globe/Tm:
Normal,Connect Normal,Normal Inject,X-Online-Host,KeepAlive
Sun
Split,Put,Front Inject,X-Online-Host,KeepAlive,DualConnect
TalkNtext
Split,Put,Back Inject,X-Online-Host,UserAgent,KeepAlive
Smart
Normal,Connect Normal,Normal Inject,X-Online-Host,ReverseProxy,KeepAlive
-end
#UFAST_HOWTOMAKEEHI
Aldz™
Terminology:
Ehi - is the abbreviation of Evozi Http Injector
UrlHost - is the Bug Host or what we call Proxy Server.
Remote Proxy - the gateway of payload that connects ProxyServer into Networks Ip
Ssh - is the abbreviation of Secure Shell that used to protect data transferring.
How to find a Proxy Server:
1.Open the Data or Wifi
2.Make sure you have no balance,promo or any vpn
3.Go to your Default Browser (built in)
4.Type your desired website (example: clubzed.ph)
5.If its successfully Open without any load or vpn then it is a Proxy Server.
How to find a Remote Proxy:
1.Access the internet and search for websites like gatherproxy.com
2.Find the lowest latency according to your desired country(example Singapore 128.199.01.01 Port:80)
3.If you have gather many Singapore Remote Proxy then we proceed to the next step.
How to make SSH account:
1.Access the internet and look for the websites like,
tcpvpn.com
bestvpnssh.com
mytunneling.com
skyssh.net
jetssh.com
2.Make and Register an account to your desired country (example: Singapore)
3.After successfully registered,Dont forget the following important information after you registered.
example i make a singapore account in tcpvpn,so it should go like this
(I will create on tcpvpn.com and I will choose a singapore and I will input a username of aldz and a password of 12345.
After you successfully created a Ssh account this might be like)
HOST:128.199.01.01
SSH PORT:22
USERNAME:tcpvpn.com-aldz
PASSWORD:12345
How to Generate Payload:
1.Open the Http Injector App.
2.Go to Payload Generator on left side.
3.Choose your desired setup.
For example I am using Globe,the I want normal connect,
The set up must go like this:
NORMAL
UrlHost:clubzed.ph
Connect, Normal Injection
X-Online-Host
Keep-Alive
then Generate.
The generated payload must appeared like this:
CONNECT [host_port] [protocol][crlf]Host: clubzed.ph[crlf]X-Online-Host: clubzed.ph[crlf]Connection: Keep-Alive[crlf][crlf]
After generated, input the Remote Proxy You gather ealier in gatherproxy.com with a corresponding Port.
Example:
128.199.01.01:80
Go to Ssh Settings in the left side and Fill up the following. Use the info of your ssh account you created earlier.
this is my example
SshHost: 128.199.01.01
SshPort: 22
Username: tcpvpn.com-aldz
Password:12345
After you set up all, Click start. Always check the log panel of the injector. This indicates whether your Payload is correct or Remote Proxy is not working. If always reconnecting,injecting try to find another remote proxy and test again until it succeded to released an Established Connection.
Payload Format
Globe/Tm:
Normal,Connect Normal,Normal Inject,X-Online-Host,KeepAlive
Sun
Split,Put,Front Inject,X-Online-Host,KeepAlive,DualConnect
TalkNtext
Split,Put,Back Inject,X-Online-Host,UserAgent,KeepAlive
Smart
Normal,Connect Normal,Normal Inject,X-Online-Host,ReverseProxy,KeepAlive
-end
#UFAST_HOWTOMAKEEHI
Aldz™
Last edited by Admin on Tue May 02, 2017 12:35 am; edited 3 times in total
Re: HOW TO MAKE EHI CONFIGURATION
Slamat po Aldz
GreatJohn- Leecher
- Posts : 2
Points : 2
Join date : 2017-04-25
Re: HOW TO MAKE EHI CONFIGURATION
Salamat sir Aldz.
jhonzlhiz0015- Leecher
- Posts : 1
Points : 1
Join date : 2017-04-25
_mr.v4ccum3_- UFAST MODERATOR
- Posts : 2
Points : 14
Join date : 2017-04-25
Age : 30
Location : mindanao/taga bundok apo
Re: HOW TO MAKE EHI CONFIGURATION
Salamat mamaw!
ufastarvy- Leecher
- Posts : 1
Points : 1
Join date : 2017-04-25
Age : 32
Re: HOW TO MAKE EHI CONFIGURATION
Up. sana mkagawa din ako ehi
mardox11- Leecher
- Posts : 1
Points : 1
Join date : 2017-05-18
Re: HOW TO MAKE EHI CONFIGURATION
thanks sa pgtangap dito mga master at thanks din sa thread na to
leahcim22- Leecher
- Posts : 1
Points : 1
Join date : 2017-05-23
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|